Steel Billet
Continuously cast billet for re-rolling, in construction and engineering grades, with analysis to the buyer’s specification.
- Section
- 100×100 – 150×150 mm
- Length
- 6 m / 12 m
- Grade
- 3SP / 5SP · ST37 · ST52
- Standard
- GOST 380 · DIN 17100
Export
Export Commodities
Alongside supplying refractory raw materials into Iranian industry, we export Iranian commodities to regional markets and beyond. The figures below are the basis of an enquiry; analysis and packing are adjustable to the buyer.
Request an export quotationOur highest-volume export lines
Iran is among the world’s three largest bitumen exporters, and a significant source of urea, sulphur and iron ore. These are the lines we move in the largest tonnages.
Steel chain
Deformed Rebar
Ribbed reinforcing bar from established Iranian mills, with mill analysis and tensile certificates for every consignment.
- Diameter
- Ø 8 – 32 mm
- Grade
- A2 · A3 · A4
- Standard
- ISIRI 3132 · BS 4449 · ASTM A615
- Packaging
- 12 m bars, bundled
Steel & Galvanised Sheet
Hot and cold rolled sheet and galvanised sheet across a wide thickness range, supplied as coil or cut length.
- Thickness
- 0.3 – 25 mm
- Width
- 1000 / 1250 / 1500 mm
- Zinc coating
- 60 – 275 g/m²
- Form
- Coil or cut sheet
Direct Reduced Iron (DRI)
Sponge iron from direct reduction of pellets, the principal charge for electric arc furnaces; metallisation and carbon adjustable to the steelmaker’s practice.
- Total iron (Fe)
- 90 – 94%
- Metallisation
- 90 – 93%
- Carbon
- 1.5 – 2.5%
- Size
- 4 – 20 mm
Wire Rod
Hot-rolled wire rod in coil for drawing, mesh and fastener manufacture, in low- and medium-carbon grades.
- Diameter
- Ø 5.5 – 16 mm
- Grade
- 1006 · 1008 · 1010 · 1018
- Coil weight
- 1.8 – 2.2 t
- Packaging
- Coils, wire-bound
Minerals & chemicals
Iron Ore
Concentrate, pellet and sized ore from Iranian mines at negotiable grade, available in large tonnages for bulk loading.
- Fe content
- 54 – 67%
- Moisture
- ≤ 8%
- Form
- Concentrate · pellet · lump
- Loading
- Bulk, vessel or truck
Sulphur
High-purity granular and lump sulphur recovered from gas refineries, for sulphuric acid and fertiliser production.
- Purity
- ≥ 99.8%
- Moisture
- ≤ 0.5%
- Ash
- ≤ 0.05%
- Form
- Granular or lump
Urea
Granular and prilled urea at 46% nitrogen, the highest-volume nitrogen fertiliser, in jumbo bags or 50 kg sacks.
- Nitrogen
- ≥ 46%
- Biuret
- ≤ 1%
- Moisture
- ≤ 0.5%
- Packaging
- 50 kg bag or jumbo bag
Cement & Clinker
Portland cement in several types plus clinker, from Iranian plants with export capacity, bagged or in bulk.
- Type
- Portland I · II · V · pozzolanic
- Standard
- EN 197-1 · ASTM C150
- Packaging
- 50 kg bag · jumbo bag · bulk
- Clinker
- Available separately
Chamotte
Calcined fireclay aggregate in seven grades from 41 to 65% alumina, for fireclay bricks, castables and ramming mixes — the volume-stable backbone of medium-duty refractory linings.
- Al₂O₃
- 41 – 65%
- Fe₂O₃
- ≤ 2.8%
- Grade
- CS-10 · CS-20 · CT-44 … CT-65
- Granulation
- 0 – 30 mm · graded fractions
- Form
- Lump, grain or milled
Andalusite
Aluminosilicate mineral that mullitises directly on firing, giving refractories high creep and thermal-shock resistance without a separate sintering step.
- Al₂O₃
- 57.4 – 59.1%
- Fe₂O₃
- 0.53 – 0.61%
- Granulation
- 0 – 1 / 1 – 3 / 3 – 6 mm
- Packaging
- Jumbo bag or bulk
Fluorspar
Calcium fluoride in metallurgical and acid grades — the slag fluidiser of steelmaking and the feedstock for hydrofluoric acid.
- CaF₂
- 85 – 97%
- SiO₂ (max)
- ≤ 3%
- Type
- Metallurgical and acid grade
- Packaging
- Jumbo bag or bulk
Petroleum products
Bitumen
Penetration-grade bitumen for road construction and waterproofing, supplied in drums, jumbo bags or bulk.
- Grade
- 40/50 · 60/70 · 80/100 · VG10 – VG40
- Penetration
- ASTM D5
- Softening point
- 45 – 60 °C (by grade)
- Packaging
- 180 kg drum · jumbo bag · bulk
Metals & oxides
Lead Ingot
High-purity lead ingot for battery manufacture, alloying and industrial linings.
- Purity
- 99.97 – 99.99%
- Standard
- ASTM B29
- Ingot weight
- 25 – 50 kg
- Packaging
- Bundled on pallets
Chromium Oxide
High-purity green chromium oxide for chrome-bearing refractories, pigments, ceramics and metallurgy.
- Cr₂O₃
- ≥ 99%
- Moisture
- ≤ 0.5%
- Granulation
- Micronised powder
- Packaging
- 25 kg bag
Molybdenum Oxide
Technical molybdenum oxide, the alloying addition for tool and high-strength steels, in briquette or powder form.
- Mo content
- ≥ 57%
- Form
- Briquette or powder
- Application
- Steel and cast-iron alloying
- Packaging
- Drum or jumbo bag